Disk Copy to SSD Hard Drive

[charlesml3]

I'm looking at the new SSD hard drives to replace my Windows 7 Pro x64 OS drive I have now.

Problem is, the biggest SSD drive out is 256Gig which is smaller than the traditional drive I have now.

I realize Disk Copy will just see it as a 256Gig SATA disk but I'm concerned about migrating the traditional disk over since it's bigger. I have less than 256Gig used on the old disk so it should "fit" but I'm not sure this is going to work.

Anybody tried this?

Thanks in advance!

-Charles

[fortunewill]

Dear Charles,

Thank you for contacting us.
EASEUS Disk Copy will copy the disk sector by sector, so after copy the destination disk would be just the same as the original one. For your problem, the original disk is larger than the SSD disk, the partitions which beyond the size of destination disk would not be copied properly, so we suggest you use EASEUS Todo Backup to achieve your aim. Here you can get more information about EASEUS Todo Backup and download it:
http://www.todo-backup.com/
To clone disk, please refer to:
http://www.todo-backup.com/products/fea ... -guide.htm
You should close your computer immediately after the clone process finished, disconnect one of your two hard disks from your computer, and then you can boot your computer again. Otherwise, it could cause bootable problem.

Sincerely,
EASEUS Support Team P
EASEUS Customer Support Center:
http://www.easeus.com/support.htm